As an Amazon Associate I earn from qualifying purchases
- 35%

ANCEL AD410 Enhanced OBD II Vehicle Code Reader Automotive OBD2 Scanner Auto Check Engine Light Scan Tool Emission Analyzer

Add your review

$49.99 $32.36

$49.99 $32.36

(-35%)
Add to wishlistAdded to wishlistRemoved from wishlist 0


Price: $49.99 - $32.36
(as of Jan 07,2021 16:08:55 UTC – Details)


Product Description

AD410
AD410

ANCEL AD410 OBDII Scanner

Where’s the OBDII interface?

The OBD2 port is often under the dash, or under a panel below the handbrake in the centre console.

How to get started?

Simply plug into the OBD II port on your car and turn the ignition on and you ready to go.

Why I can’t erase the fault code?

The fault causing the fault code to show will need to be repaired first then code can be erased.

NOTE:

Works on vehicle with 12V battery ONLY
Must be 16 PIN OBD II protocol

engine
engine

Check Engine

brand
brand

INTRODUCTION TO AD410

ANCEL AD410 is a greatly enhanced upgrade from more basic car code readers. It has the capability to read and erase fault codes when the check engine light comes on. It also shows real-time live data reported by the ECU, including engine temperature, O2 sensor readings, among other things. The device is easy to use and no prior experience with diagnostic tools is required.

Detect Engine System
Turn Off the Check Engine Light
Let You Know the Meaning of the Error Code

KEY FEATURES

Reads and clears check engine light codes, both generic and manufacturer-specific, and resets monitor
Built-in DTC look-up library for manual retrieval and code definition
I/M Readiness to test misfire, fuel system and Comprehensive component
Displays all data stream items or selects any item of live data for graphing
Views freeze frame data and shows vehicle parameters recorded by ECU when an emission-related fault occurs

Performs O2 sensor test to allow retrieval and viewing of O2 sensor monitor test results for the most performed tests from the vehicle’s on-board computer
Uses On-board monitor test to read the results of on-board diagnostic monitoring
Performs EVAP system test to detect any leak in the vehicle’s EVAP system (not all vehicles support EVAP test and test availability depends on what’s installed on the OBDII system by the manufacturer)
Displays vehicle information via VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number)

DTC lookup
DTC lookup

CODE DEFINITION

There is a built-in up-to-date OBD-II DTC look-up library in this device. Fault codes and their definitions can be found in the library. A 2.4″ TFT true color (262K) LCD display is fitted to provide a clear reading of the information contained in it. After a fault code is detected, the definition of the code will be shown by directly clicking the fault code selected.

live data
live data

DATA STREAM

The scan tool lets you view “real-time” Live Data. This information includes values (volts, rpm, temperature, speed etc.) and system status information (open loop, closed loop, fuel system status, etc.) generated by the various vehicle sensors, switches and actuators. It supports detailed text display, and you can view all data stream items or select a certain item of live data with a graph.

I/M readiness
I/M readiness

I/M READINESS

I/M readiness is to test Misfire / Fuel system / Comprehensive component. Quickly monitor emissions readiness check and drive cycle verification. Let you know the comprehensive status of your car’s engine system. Help you pass the Smog Check easily.”N/A” means Not Available on this vehicle, “INC” means Incomplete or not ready, “OK” means Completed or Monitor Ok.

cpu
cpu

POWERFUL CPU

Unlike other Cheap and Old versions, ANCEL AD410 scanner goes with a more advanced STM 32-bit CPU has the specialty of high speed, compressed volume and steady performance.

DTC lookup
DTC lookup

DTC Lookup

live data
live data

Live Data

I/M readiness
I/M readiness

One Key I/M

cpu
cpu

Mainboard

update

update

feedback

feedback

save money and time

save money and time

LIFETIME FREE ONLINE UPGRADE

AD410 provides life-time free software update to fix the latest bugs and add newly DTC or parameters. Just download the software from ANCEL website, then follow instructions to update.

Please Note: After the unit is plugged into a computer via a USB cable, the LCD screen will display two vertical bars until the update is complete. The update software supports Windows 7/8/10.

FEEDBACK

Have problems working on your vehicle? Don’t worry, just turn the “FEEDBACK” option on in the Settings and then send us the recorded issue file via PC, and our support team will contact you as quickly as we can.

SAVE MONEY AND TIME

Simple and super easy to use, this device is a must-have diagnostic tool for today’s technologically loaded vehicles. It is a car doctor, so to speak, that allows you to identify and troubleshoot any problem with your car engine, so you may try to fix it by yourself or know how much it costs you to have it fixed when a mechanic is involved. That’s time and money saved.

Application
Diagnoses Engine/ABS/SRS/Transmission
Test 12V Lead-acid Battery
Diagnoses All Systems for VAG Vehicles
Diagnoses Engine System
Diagnose All Systems for BMW Vehicles
Test 12/24V Lead-acid Battery

OBD-II Modes Compatibility
10
Test range: 100-2000CCA
6
10
6
Test range: 100-2000CCA

Read and Clear Codes / I/M Monitor Readiness / Retrieves Vehicle Information

Analyze battery health, detect faults of starting and charging system



Test results: Good/Replace, SOH, SOC, CCA value, CCA rating, voltage, internal resistance, etc.

View Freeze Frame Data / Reads Live Data Stream

Cranking test and Charging test
Reads live data stream

I/M Readiness /Test EVAP System
Storage battery test,Maximum load system test

DTC Lookup

Read and clear Engine/Transmission/EPB/SRS/TPMS error codes

Read data stream
Engine system activation load test, Charging system test

Internet Update



Read and Clear SRS Error Codes

Quickly and accurately determine whether the battery is good or bad.
Injector Learning/Battery Registration and DPF Regeneration
With improved battery detection function
Read & clear SRS/TPMS/ABS/SAS/Transmission/ESP etc. fault codes
Quickly and accurately determine whether the battery is good or bad.

Read and Clear ABS and SAS Error Codes
Read and clear Engine/ABS/Transmission error codes
Battery standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.

With enhanced fault code definition function give you accurate repair advice
CBS reset/correct, Battery registration/EPB reset/SAS learning/EGS clear adaption
Battery standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.

Battery Check





Advanced Functions
Print data
Print test data via PC
Throttle Position Adaption/EPB Reset/TPMS Reset SAS Calibration/Oil Service Reset

DPF regen,TPS Reset, Idle Speed Adjustment, Injector Coding(IQA)/Fuel Pump reset
Built-in thermal printer

WIDE COMPATIBILITY – Recommended by YouTube Star Scotty Kilmer on his channel. Works on most vehicles sold in the USA with model year of 1996 or newer; Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network); Displays in English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese; Requires no battery or charger as the unit gets power directly from the OBDII Data Link Connector in the vehicle.
CRITICAL FUNCTIONALITY – Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair.
ENHANCED OBDII DIAGNOSTICS – Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle’s EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission.
QVGA DISPLAY & NEW UI – AD410 code reader is a greatly enhanced upgrade from more basic diagnostic scan tools. It has a 2. 4″ TFT true color (262K) LCD display for clear test results showing. With an easy-to-read UI design, the user can easily access Setup, OBDII Diagnostics, I/M readiness, and DTC Look-up and Review. You don’t need to read the manual to know what to do, even for a beginner.
DIAGNOSTIC REPORTS & UPDATE – The “Review & Print” option can be used to save or print diagnostic reports as needed. ANCEL brand provides life-time free software updates for this unit to fix the latest bugs or add new parameters. Just download the software from the ANCEL website and then follow on-screen instructions to install.

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “ANCEL AD410 Enhanced OBD II Vehicle Code Reader Automotive OBD2 Scanner Auto Check Engine Light Scan Tool Emission Analyzer”

Your email address will not be published. Required fields are marked *

ANCEL AD410 Enhanced OBD II Vehicle Code Reader Automotive OBD2 Scanner Auto Check Engine Light Scan Tool Emission Analyzer

$49.99 $32.36

DevTechTrend
Logo
Enable registration in settings - general